HYPERCRETE HES ready to use, liquid superplasticizer and is designed to make more uniform and predictable quality concrete while accelerating the setting time and high early strength development.
HYPERCRETE HES admixture meets ASTM C494 requirements for Type E & F, high range water reducing & accelerating, admixture.
Colour: Pale to Yellow
Specific Gravity: 1.26 ± 0.03
Dosage: 0.6 to 2.0 lit / 100kg
Product Base: polycarboxylic ether
pH Value: 2-3
FEATURES
- Increased early and ultimate compressive and flexural strengths
- Accelerated setting time characteristics
- Mainly used for large structural element which needs early demoulding requirements & also interlocking blocks, paving slabs, curb stones, cement blocks or any other concrete work.
- On site, HYPERCRETE HES can be used for concrete void fillings, concrete or mortar beddings, rendering, plastering
- Highly recommended for concrete roads, Roller compacted concrete where early strength is critically important
- Recommended for reinforced or any other concrete.
- Water reduction is about 35% against normal concrete.
ADVANTAGES
- Superior finishing characteristics for flatwork and castsurfaces
- Earlier finishing of slabs - reduced labor costs
- Reduced protection time in cold weather
- Earlier stripping and reuse of forms
- Easy to disperse In concrete mixtures, avoiding many ofthe problems associated with powder admixtures.
COMPATIBILITY
HYPERCRETE HES is compatible with mineral admixtures such as Silica Fumes, Fly Ash, GGBFS and chemical admixtures such as waterproofing admixture, Air entraining agents and corrosion inhibiting agents. HYPERCRETE HES is compatible with lignosulphonate based admixtures and not compatible with naphthalene admixtures.
DIRECTIONS FOR USE
HYPERCRETE HES should be dispensed into the fresh concrete or with the final quantity of mixing water. It should not come into contact with dry cement or other admixtures until they are mixed in the concrete batch. HYPERCRETE
HES should be ideally dispensed with automatic equipment, thus ensuring uniformity of admixture used throughout the job.
DOSAGE
The optimum dosage should be determined by site trials with the particular raw materials.As a guide, the dosage rate is normally in the range of 0.6 L to 2 L per 100kg of cement.
PACKAGING AND STORAGE
HYPERCRETE HES is supplied in 5, 10, 25 and 205liters drums or 1000 L bulk delivery.
HYPERCRETE HES should be stored under shade. The shelf life of HYPERCRETE HES is 12 months in its unopened drums and tanks. Once opened, we recommend that the balance be consumed within 3 months. Stir the content prior to use.
SAFETY OF HANDLING
HYPERCRETE HS does not contain any hazardous chemicals and nontoxic. But it is recommended that safety glows are used in handling the product.
TECHNICAL SERVICE
The company provides good servicing from a team of dedicated specialists in the field. When used in accordance with its current published directions, the product will perform as described in this catalogue.
Millennium Concrete Technologies will not be responsible for difficulties caused by other materials ,conditions or inferior workmanship and quality control. We reserve the rightto determine the true cause of any difficulty by accepted test methods.
