HYPERCRETE is polycarboxylic ether based advanced superplasticizer which is specially developed for high fluidity Concrete applications. The product could be used for virtually any type of ready-mix concreting where the slump retention is important.
HYPERCRETE is compatible with all types of cements and other mineral admixtures
HYPERCRETE is free of chlorides and meets the requirements of ASTM C494Type G,BS 507 5, BSEN 934-2
Sulfonic groups of Naphthalene or Melamine based admixtures which adsorbed on to the cement particles induce a negative charge and repulse each other and increase the workability.
With a similar mechanism, but unlike sulfonic groups, the Iateral chains of the main polymer of polycarboxylic ether induce a steric hindrance with strong repulsive force which in turn increase the workability of the cement paste.
Colour: Clear to Pale Yellow
Specific Gravity: 1.07 ± 0.02
Dosage: 0.6 to 2.0 lit / 100kg
Product Base: polycarboxylic ether
pH : Value: 5-6
ADVANTAGES
- Make fluid concrete
- Self Compacting Concrete
- Longer slump retention
- No bleeding & segregation.
- Reduce shrinkage and creep.
- Reduces porosity and hence permeability of hardened concrete
- Rheoplasticity leads to a densely compacted durable concrete at hardened state.
- Substantially reduce the placement cost and the time.
- Esthetically attractive surface texture and sound finish.
- Very high water reduction and thereby low permeability and shrinkage.
- Less pumping pressure and ease of pumping
- Helps in hot weather concreting
COMPATIBILITY
HYPERCRETE is compatible with mineral admixtures such as Silica Fumes, Fly Ash, GGBFS and chemical admixtures such as waterproofing admixture, Air entraining agents and corrosion inhibiting agents. HYPERCRETE is compatible
with lignosulphonate based admixtures and not compatible with naphthalene admixtures.
DIRECTIONS TO USE
HYPERCRETE should be dispensed into the fresh concrete or with the final quantity of mixing water. It should not come into contact with dry cement or other admixture until they are mixed in the concrete. Also it can be fully dispersed with full quantity of water prior to be added to the dry mix of concrete. Agitate the liquid well prior to use.
DOSAGE
The optimum dosage should be determined by site trials with particular raw materials. As a guide HYPERCRETE is normally used at a dosage 600ml to 2000ml per 100kg of cement. However for specific requirements dosages outside the above could be used.
PACKAGING AND STORAGE
HYPERCRETE is supplied in 205 L drums, 1000L IBC tanks or in bulks tankers of 2400L
HYPERCRETE has a shelf life of 12 months in its unopened drums. All admixtures should be storedunder shade.
SAFETY AND HANDLING
HYPERCRETE does not contain any hazardous chemicals and nontoxic. But it is recommended that safety glows are used in handling the product.
TECHNICAL SERVICE
The company provides good servicing from a team of dedicated specialists in the field. When used in accordance with its current published directions, the product will perform as described in this catalogue. Millennium Concrete Technologies will not be responsible for difficulties caused by other materials, conditions or inferior workmanship and quality control. We reserve the right to determine the true cause of any difficulty by accepted test methods.
